How do I fix canon 6502 error?

Published by Charlie Davidson on

How do I fix canon 6502 error?

Follow these steps to clear the error:

  1. Turn the printer OFF, and unplug the power cord from the power supply.
  2. Lift the operation panel to see the inside of the printer.
  3. Plug the printer back in and turn it on with the operation panel lifted.

How do I clear the fault on my Canon printer?

Reset the Canon printer

  1. Switch on the printer.
  2. Press and hold the Stop/reset button.
  3. Press the button that you use to make a color copy and hold it down.
  4. Wait 5 seconds.
  5. The printer now reboots and sets itself up.
  6. Does the printer indicate that the device needs to be calibrated?
  7. You’ve reset your printer.

How do I troubleshoot a Canon printer error?

Cause and Solution

  1. Ink tank is empty.
  2. Ink tank not installed in proper position.
  3. Ink tank is not installed securely.
  4. Unnecessary print jobs are left in queue / Computer problems.
  5. The CD-R Tray is not set properly.
  6. The printable DVD/CD is not placed properly on the CD-R Tray.
  7. The machine is not ready.

How do I fix Error 03 on my Canon printer?

Reset the printer to default factory settings:

  1. Press and hold the stop button on your Canon printer.
  2. After the alarm light flashes nineteen times, release the stop button immediately.
  3. Now your printer will go through the reset process.
  4. Once the printer reset is complete the canon error e03 will go away.

How do I fix Canon ts3322 error?

Press the printer’s OK button to resolve the error. Turn off the wireless router and turn it back on, and then perform setup again. If the above does not resolve the problem, refer to the instruction manual supplied with the wireless router and check the settings. Cannot connect to a wireless router.

How do I run a diagnostic on my printer?

How to print a test page from Windows:

  1. Go to Devices and Printers.
  2. Choose your printer model and right click to open drop down.
  3. Click Printer Properties.
  4. Select Print Test Page and click OK.
  5. A test print will be sent to your printer.

How do I fix error 6000?

Methods to Resolve Canon Printer Error 6000

  1. Firstly, Unplug the printer from the power source and leave it in pause mode for few mintues.
  2. Now, plug in the printer again and switch it on.
  3. Just repeart this process once or twice and then release the “Power” button.
  4. Snap the “Stop” button 4-5 times.

What does printer Error Code 6000 mean?

There are foreign objects such as dust particles, paper pieces, pins, stickers or other objects that block the proper opening of the paper feed tray. Because of the jam, the printer displays the error 6000. If the paper feed tray is not fitted correctly in the printer, the error code might be displayed.

Categories: Contributing