Why is my DIRECTV on demand not working?

Yes, that’s why you have to perform a double-reboot of your DIRECTV receiver. To do this, all you have to do is to press the RED reset button on your receiver. When you do this, the receiver will start itself back up again. When it’s back on, reboot it again by pressing the red button again.

Why does my DIRECTV say channel not available?

Restart your receiver If you’re still seeing the error message, restart the receiver: Press the power button and wait for it to reboot . You can also unplug it from the electrical outlet, wait 15 seconds, and plug it back in.

What is error code 736 on DIRECTV?

DIRECTV Error Code 736 Error Code 736 means IPPV (Interactive Pay Per View) has been disabled due to STB not successfully completely a callback. Error Code Solution = 60 days with no callback, either resolve callback issue or disable IPPV flag and resend all authorizations.

How do I reboot my DIRECTV?

Unplug your receiver

1. Unplug your receiver’s power cord from the electrical outlet, wait 15 seconds, and plug it back in.
2. Press the Power button on the front panel of your receiver. Wait for your receiver to reboot.

Why does my DirecTV keep losing sound?

Check the audio/video cables Check that the device connected to the TV and the receiver are powered on. On your remote control, press TV INPUT to cycle through inputs, such as HDMI and HDMI3. If nothing happens, try programming your remote control. If the problem persists, try connecting the receiver to the TV.

Why is my DirecTV not connecting?

Unplug your receiver Unplug your receiver’s power cord from the electrical outlet, wait 15 seconds, and plug it back in. Press the Power button on the front panel of your receiver. Wait for your receiver to reboot.

How do I access my DIRECTV account?

Access your directv.com account. Select My Account > My Account Overview. Your account number displays at the top of the page.

How do I fix error code 772 on DIRECTV?

DIRECTV error code: 772

1. Unplug your receiver’s power cord from the electrical outlet, wait for 15 seconds, and plug it back in.
2. Press the Power button on the front panel of your receiver. Wait for your receiver to reboot.

How do I fix DirecTV pixelation?

There are three ways to do this:

1. Press MENU then go to Settings, then Reset Options. Choose Restart all Locations.
2. Find the red reset button and push it. It’s usually behind a spring-loaded door on the front of your receiver.
3. Unplug your receiver (or Genie DVR) for at least 15 seconds then plug it back in.