How do you create a family in Revit?

Published by Charlie Davidson on

How do you create a family in Revit?

Create a Family from a Template

  1. Click File tab New Family.
  2. Optionally, to preview a template, select it.
  3. Select the family template that you want to use, and click Open.
  4. In the Project Browser, notice the list of family views.
  5. Click File tab Save As Family.

How do you create mechanical equipment in Revit?

In the Project Browser, open a view where you want to place the mechanical equipment. Click Systems tab Mechanical panel Mechanical Equipment, and in the Type Selector, select a particular equipment type. On the ribbon, verify that Tag on Placement is selected to tag the equipment automatically.

How do I load a family in Revit 2014?

If you are unsure where to load a family into your Revit project you can do so by going to the Insert tab > Load Family > navigate to the family you would like to load and click the Open button. This will make the family active and you can go ahead and place the family.

What does Revit stand for?

The ease of making changes inspired the name Revit, a contraction of Revise-Instantly. At the heart of Revit is a parametric change propagation engine that relied on a new technology, context-driven parametrics, that was more scalable than the variational and history-driven parametrics used in mechanical CAD software.

How do I make a Revit family from scratch?

To create a loadable family, you select a family template, and then name and save the family file. Select the family category based on how the family is classified in the industry, that is, how the part is ordered from a manufacturer.

How do I add a pump in Revit?

Click the Modify | Mechanical Equipment Sets tab System Tools panel Edit System. Click Edit Piping System tab Parallel Set panel (Add). In the drawing area, select two or more pumps to include in the pump set. Note: The Classification parameter for each pump must be set to Pump in the Family Editor.

How do I load a family door in Revit 2015?

Load Families

  1. Click Insert tab Load from Library panel (Load Family).
  2. In the Load Family dialog, double-click the category of the family that you want to load.
  3. Preview any of the families (RFA) in the category: To preview a single family, select it from the list.
  4. Select the family that you want to load, and click Open.

What is Revit family for?

The simple definition for families in Revit is that it is a group of components used to build a model, for example, walls, windows, stairs, doors, bathrooms, fixtures, showers, etc., with a common set of properties, or parameters, and a related graphical representation.

What is Revit family creation?

BIM objects are a family of intelligent virtual 3D objects that provide detailed information of a product or component about its physical characteristics such as its geometry and visual graphical representation.

How to create your own Revit family template?

1. Start with the basics. Before you start drawing, think about how you want the family to act and how you want the user to interact with the final family. There are a lot of template options, but most of the time, “Generic Model Face Base” should be a good template to use.

Which is the best template to create a Revit?

There are a lot of template options, but most of the time, “Generic Model Face Base” should be a good template to use. It’s best to start by drawing left and right reference planes, use the aligned dimension tool to snap to the center origin point, then do the same for front and back (don’t forget to make them equidistant).

Is there a Revit MEP forum for Autodesk?

Welcome to Autodesk’s Revit MEP Forums. Share your knowledge, ask questions, and explore popular Revit MEP topics. This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations.

How do you draw a family in BIMsmith?

Start drawing. Draw the base for the parent family by using the extrusion tool. In order to lock the sketch lines to the reference plane so you are able to flex the model, choose the lock button and select the desired reference planes to trim it back into place. Go into an elevation view.

Categories: Blog