How do I reprogram my LG washing machine?

Published by Charlie Davidson on

How do I reprogram my LG washing machine?

How to reset the washing machine:

  1. Press POWER to turn the washer off.
  2. Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
  3. With the power disabled, press and hold the START/PAUSE button for 5 seconds.
  4. Plug the washer back in, or turn the circuit breaker back on.

How do I run a diagnostic on my LG front load washer?

Press the POWER to turn on the washer. Place the mouthpiece of your phone between the Smart Diagnosis logo and the POWER button. After pressing the Start Diagnosis button, press and hold the TEMP button until a countdown displays on the washer. Keep the phone in place until the tone transmission has finished.

How do I change the default settings on my LG washer?

Press the Power button. – The lights around the cycle selector knob will illuminate and a chime will sound. Turn the cycle selector knob to the desired cycle. – The optimum default cycle settings are automatically set according to the wash cycle.

How do I force my LG washer to drain?

If you want to perform a drain-only cycle, turn on your LG washer and press the spin button and then press start. After a few minutes, the cycle will end and your washer should have drained out the water. Another way you can drain the water is by turning off your washing machine and unplugging it from the outlet.

What is the difference between deep wash and heavy duty?

from Sears Michigan City: Deep wash means extra water hope that worked for you. deep wash should put extra water in the tub but it depends on the weight of your load size if it will completely cover the fabric. heavy duty wash might be a better cycle to get your fabric clean.

Why does my washer keep saying IE?

An IE error code indicates that the washer was unable to fill with water. During cold and freezing weather conditions, an IE error code could mean the water in the water supply lines are frozen.

How do I fix OE error on my LG washer?

OE can be triggered by a kinked drain hose or a clogged drain pump filter.

  1. Check for kinked drain hose. Check behind the washer to ensure that the drain hose is not kinked or clogged.
  2. Test the drain pump.
  3. Do you hear the humming sound?
  4. Clean drain pump filter.
  5. Run tub clean cycle.
  6. Request Repair.

What to do if your LG washing machine is not working?

Press POWER, and turn the machine OFF. Unplug the machine. Note: If you cannot unplug the washer, power the washer OFF, and trip the circuit breaker. With the power being disabled, press and hold the START/PAUSE button for 5 seconds. Power the unit back ON. Press-in on the door firmly. Select any cycle, and press START/PAUSE.

How does the LG signature washer and dryer work?

LG SIGNATURE Appliances LG SIGNATURE Washers/Dryers Featured Products Smart Laundry Appliances Redefine Laundry in Half the Space LEARN MORE Power Clean Big Loads in Under 30 Minutes Get it done in no time with TurboWash™ 360° Fit More in Every Load With 5.5 cu. ft., you can do more laundry in fewer loads.

What to do if you get an error code on your washing machine?

Unplug the washer for 10 seconds. Plug the washer back in, ensure that the door is completely closed, and restart the cycle. If the dE1 error code persists, close the water taps; and unplug the washer. The unit will require a repair service.

What causes an OE error code on a LG washer?

An OE error code indicates that the washer was unable to drain the water. The main causes for this error code are a kinked drain hose, a clogged drain pump filter, or a problem with the drain pump itself.Kinked Drain Hose Clogged Drain Pump…

Categories: Blog