What is an oil impregnated paper?

Published by Charlie Davidson on

What is an oil impregnated paper?

Oil impregnated paper (OIP) is a term used for bushings that utilize plain craft paper, with the condenser core saturated with transformer-grade mineral oil. OIP bushings usually have upper air-side and lower oil-side porcelain insulators.

What is condenser bushing?

Condenser bushings are devices which allow high voltage conductor to pass through grounded walls of power transformer. Condenser bushings should meet the electrical, thermal and mechanical requirements of the application which is taken into consideration.

What material is used for the insulating bushings in dry type distribution transformers?

The core of dry-type bushing is an epoxy resin-impregnated condenser core which is wound from insulating paper and aluminum foil electrode, subsequently impregnated in epoxy resin under vacuum conditions and then heated for curing.

Which material is used for transformer bushings?

Typical insulation used in a capacitance-graded bushing is oil-impregnated paper (OIP), resin-impregnated paper (RIP), and resin bonded paper (RBP). Capacitance-graded bushings also use mineral oil, usually contained within the bushing.

Is oil impregnated paper an insulator?

Oil-impregnated insulation paper has been widely used in transformers because of its low cost and desirable physical and electrical properties. These shallow traps changed the insulation properties of oil-impregnated insulation paper.

Is paper an insulating material?

Yes, paper is an insulator. In fact, it is said to be a good insulator. A good insulator does not let heat or electric energy to pass through the…

What are the types of bushing?

Bushings and Plain Bearings – Overview

  • The Self-Lubricating Bushing Concept.
  • Metal-Polymer Composite Bushings (Plain Bearings)
  • Bronze Wrapped Bushings.
  • Filament Wound Plastic Self-lubricating Bushings.
  • Injection Molded Plastic Self-lubricating Bushings.

What is difference between bushing and insulator?

In electric power, a bushing is a hollow electrical insulator that allows an electrical conductor to pass safely through a conducting barrier such as the case of a transformer or circuit breaker without making electrical contact with it.

Is gold an insulating material?

Insulators oppose electrical current and make poor conductors. Some common conductors are copper, aluminum, gold, and silver. Some common insulators are glass, air, plastic, rubber, and wood.

What is the main drawback of using paper as the insulating materials?

What is the main drawback of using paper as the insulating material? b. Has poor dielectric strength.

What kind of oil is in oil impregnated paper?

Oil impregnated paper (OIP) is a term used for bushings that utilize plain kraft paper, with the condenser core saturated with transformer-grade mineral oil. OIP bushings usually have upper air-side and lower oil-side porcelain insulators.

How is oil impregnated paper ( OIP ) bushing made?

Sealing is accomplished by oil-resistant rubber gaskets inserted into grooves; the gaskets form an oil tight seal containing the condenser assembly and insulating oil. A clamping system imparts mechanical strength and support to the bushing. Springs (located in the expansion chamber) place the conductor of the bushing under constant tension.

When was the OIP condenser type bushing invented?

As early as 1937 his patent for OIP condenser type bushings marked a technical breakthrough. Trench OIP transformer bushings are designed to be connected to oil-insulated power transformers. We offer the right solution for a wide range of transformers in different environments:

Which is the best oil impregnated transformer bushing?

STAROIP and STARON bushings∗are the new generation of Oil Impregnated Paper condenser bushing manufactured according to IEEE C57.19.01 (ANSI) standard for transformers application. Maintenance free top terminal with multi-spring contact

Categories: Blog