Why is my SteriPEN blinking red?

The Classic 3’s three LED indicator lights let you know the status of your SteriPEN and the water purification process. Green blinking LED(s) indicates succesfull water treatment. The red LED indicates unsuccessful water treatement, low battery level, battery replacement needed, or UV lamp replacement needed.

Does a SteriPEN really work?

Used correctly the SteriPEN works pretty well. Bacteria counts were reduced more than 99.99%, but spores were only reduced 99.57% on average. If you don’t agitate the water, this drops to 94.2% on average. Thankfully, the device won’t turn on if not immersed in water.

How long does SteriPEN last?

LAMP LIFE: The bulb in the Ultra is rated to work up to 8,000 treatments before it burns out. At 4-6L per day, that’s the equivalent of 4.4 years of clean water for one person. Also, if you do actually use up your Ultra bulb, SteriPEN will replace your Ultra for free.

Which SteriPEN is best for backpacking?

We’ve found that the Adventurer Opti is the best option for backpackers, due to its weight, simplicity, and battery life. Compare SteriPen Adventurer Opti prices below.

How do I know if my SteriPEN is working?

When the water is detected the UV lamp will automatically light. Note: if the SteriPEN doesn’t light up, then the water should not be consumed. Agitate the water by stirring the SteriPEN until the lamp turns off. The green LED will turn on to indicate that the dose is complete.

How long does a SteriPEN last?

Steripen Ultra turns itself off once ultraviolet treatment is complete; can be used up to 8,000 times!

Can you use a SteriPEN in a metal bottle?

What containers does it work with? The SteriPEN can be used to treat water contained within plastic, metal, ceramic, or glass containers.

How do you clean SteriPEN?

To accomplish this, remove SteriPEN from water, dry sensing pins off and immerse in water to activate again. To treat 0.5 liter of turbid water, use two 0.5 liter doses. To accomplish this, remove SteriPEN from water, dry sensing pins off and immerse in water to activate again.

What’s the best way to use a steripen?

Whilst the LED is flashing dip the UV lamp into the water until the lamp and water sensors are completely immersed. When the water is detected the UV lamp will automatically light. Note: if the SteriPEN doesn’t light up, then the water should not be consumed. Agitate the water by stirring the SteriPEN until the lamp turns off.

How do you turn on a steripen lamp?

Note: sensors must be dry. Push on/off button twice for up to 0.5L, or once for 0.5 – 1L of water, the green LED will flash for 15 seconds indicating that the SteriPEN is ready to use. Note: this step must be completed BEFORE immersing the lamp in water.

Can a steripen battery work in cold weather?

Low Temperatures. Battery performance may be adversely affected by cold weather, try to ensure your SteriPEN is above 0°C before use. Store your batteries in your pocket or in a warm place in cold weather.