How do I get to my router setup page?

Published by Charlie Davidson on

How do I get to my router setup page?

You log into your router’s firmware through a browser. Any browser will do. At the address field, type the IP address of your router. Most routers use an address of

How do I log into my Sky router?

Steps for logging in to your Sky WiFi Router:

  1. Browse to on your internet browser.
  2. You will come to a login screen. Enter the username and password from the sticker on the bottom of your Sky WiFi Router.
  3. If you’ve logged in successfully, you’ll see the web interface home page (as seen below) Related Articles.

Is My Sky router 2.4 Ghz or 5ghz?

Usually by default the Sky boxes will connect via the 2.4ghz connection as this is what they use when connected to other broadband providers. If you go through the network settings it should provide a list of networks you can tell it to connect too, you should then be able to manually choose the 5ghz network.

How do I access my 192.168 0.1 router?

Login Steps

  1. Enter into your browser’s URL bar, often referred to as the address bar.
  2. You should then be allowed into the login panel; this is where you enter your router username and password.

How do I change my Sky router from 5GHz to 2.4 GHz?

How to separate WiFi bands

  1. Type 192.168. 0.1 into your browser.
  2. Select the WiFi tab.
  3. Enter the login details that apply to your Sky Hub.
  4. Scroll down and untick the ‘Synchronise 2.4 GHz and 5 GHz Settings’ box.
  5. To help identify the two WiFi bands, edit one of the SSID’s to make it identifiable.
  6. Select Apply.

How to access your Wi-Fi router’s settings?

How to Access Your Wi-Fi Router’s Settings Find Your Router’s IP Address. You log into your router’s firmware through a browser. Username and Password. You’re asked for a username and password to access your router’s firmware. Change Router Settings. Change Router Login. Review Wi-Fi Password.

How to get your Sky router statistics?

This tutorial will show you how to get the router stats from your Netgear DG934G V2 Sky Router . Step 1 . Open your web browser. Type in (or click this link) Type in your username and password: Defaults are username: admin password: sky. This should then present a screen similar to this. Scroll down the page, and you will see a “Show Statistics” link. Step 2 . Click this and the stats are then shown.

How do I access my WiFi modem?

Accessing your wireless modem is as simple as opening your browser of choice and typing in the default IP address to access the router. Step. Open the administrator portal to your router. Typically, this requires you to open a Internet browser and type the following: “,” “,” and/or “”.

Categories: Trending