How do I fix E08 on my Canon printer?

Published by Charlie Davidson on

How do I fix E08 on my Canon printer?

The Canon E08 error message indicates that the “Ink absorber is almost full” in the bottom of your printer. To bypass this message you can simply press the black or colour button of your printer which will allow you to continue printing.

What does E8 mean on Canon printer?

platen waste-ink absorber
Check the printer’s display for code E8 if you installed the ink cartridge properly and you cannot print. Code E8 indicates the platen waste-ink absorber is full. To clear an E8 error, open the printer’s protective cover until the print head moves all the way to the left.

How do I connect my Canon printer to WIFI?

Connecting Device to Printer

  1. Turn on wireless communication on your computer or smartphone. For Android or iOS, enable “Wi-Fi” on your device’s “Setting” menu.
  2. Select “XXXXXX-iP110series” (“XXXXXX” represents last six digits of printer’s MAC address.) from SSID list displayed on device.
  3. Enter password.

Do you need both ink cartridges for a Canon printer to work?

Printer cartridges can be replaced on an as needed basis! If one cartridge is running low, you do not have to replace the other colors at the same time. However, you do need to have all of the printer cartridges installed in the printer for it to work.

How do I reset my Canon e510 printer cartridge?

Service mode operation procedures:

  1. Press and hold the STOP/RESET button.
  2. Press and hold the ON button (DO NOT release both buttons)
  3. When the Plain Paper LED lights in green while holding the ON button, release the STOP/RESET button.

How do I fix my Canon error code 1702?

Reliable Solutions to Fix Canon Printer Error Code 1702

  1. Solution 1 – Press Ok to Print Continue.
  2. Solution 2 – Reset the Waste Ink Absorber.
  3. Solution 3 – Replace the Ink Absorber.

How do I fix a Canon printer error?

Reset the Canon printer

  1. Switch on the printer.
  2. Press and hold the Stop/reset button.
  3. Press the button that you use to make a color copy and hold it down.
  4. Wait 5 seconds.
  5. The printer now reboots and sets itself up.
  6. Does the printer indicate that the device needs to be calibrated?
  7. You’ve reset your printer.

Categories: Users' questions