How do I setup my Linksys wireless G router?

How to Set Up a Linksys WRT54G Wireless G Router

1. Step 1: Connect the Modem. Plug the Ethernet cable from your cable or DSL modem into the Internet port on the router.
2. Step 2: Connect Your Computers.
3. Step 3: Connect the Power.
4. Step 1: Log In.
5. Step 2: Open Wireless Settings.
6. Step 3: Name the Network.
7. Step 4: Set Up Security.

Is Linksys Wireless G outdated?

The WRT54G was a device for a different time. Indeed, its specs are pretty anemic by today’s standards. With Internet speeds increasing beyond 100 megabits, sometimes even to 1 gigabit, the Linksys WRT54G is obsolete in those cases. You’re wasting money on the faster Internet speeds.

How do I access my Linksys Wireless G Broadband Router?

Next open a web browser window on the connected computer and type http://192.168.1.1 into the address bar and press enter. A window will pop up prompting you for a username and password to access the configuration page for your router. Enter admin for both the username and password.

How do I setup my Linksys 2.4 GHz wireless router?

Click the Wireless tab.

1. Under the Basic Wireless Settings sub-tab, select Manual.
2. NOTE: Select either the 2.4 GHz or 5 GHz band.
3. For the Linksys Wi-Fi Routers, you may enable either the 2.4 GHz or 5 GHz band, or both by setting the Network Mode to your desired standard (i.e. Mixed, Wireless-N Only, etc.).

What does a Wireless G Broadband router do?

The Wireless-G Broadband Router bridges wireless networks of both 802.11b and 802.11g standards and wired networks, allowing them to communicate with each other. With your networks all connected, wired, wireless, and the Internet, you can now share files and Internet access—and even play games.

How old is wireless g?

Wi-Fi History In 2003 wireless equipment operating according to IEEE 802.11g became available and in 2009 devices conforming to 802.11n came along. Each update improved the performance of routers in speed, range, or reliability.

How do I connect my wireless G broadband router?

How to Set Up a Linksys Wireless G Broadband Router

1. Connect the broadband Internet modem to the computer using an Ethernet cable.
2. Connect the Broadband modem to the Linksys Wireless G router’s “Internet” port using an Ethernet cable.
3. Plug the router into the power outlet.

How do I setup my Linksys wireless router without a computer?

How to set up a Wi-Fi router without a computer

1. 1) Plug in your router, and wait a minute or two for it to completely power up.
2. 2) Using your smartphone/tablet, turn on your Wi-Fi and connect to your router’s network.
3. 3) You will be prompted to provide a password.
4. 4) When connected, open your device’s browser.