Why is my LG air conditioner not turning on?

Published by Charlie Davidson on

Why is my LG air conditioner not turning on?

If your air conditioner powers on but will not run, this is usually the result of an inadequate power supply for the unit. Turn the circuit breaker to the unit off and back on again. If the air conditioner requires a 208/230 volt power supply, the outlet must be rated to provide the proper power level to the unit.

How do you fix an air conditioner that won’t turn on?

What Should I Do if My Air Conditioner Won’t Turn On?

  1. Check your Thermostat.
  2. Check Your Air Filter.
  3. Look for a Blown Fuse/Tripped Circuit Breaker.
  4. See if the Emergency Shut-Off Switch Is Tripped.
  5. Check the Inside Unit’s Power Switch.
  6. Make Sure the Drain Pan & Lines Aren’t Clogged.
  7. Look for a RESET Button.

Why my LG AC compressor is not working?

Common solutions for: LG Air conditioner compressor won’t run. The temperature control board provides voltage to the fan motor and compressor. If the control board is defective, it may stop providing voltage to the compressor. If the thermostat is defective, it may prevent the compressor from running.

Where is the fuse located on a LG air conditioner?

The fuse will be located near the circuit board; check to see if it has blown, using a multi-meter if necessary. Replace the fuse if it has blown.

What causes an AC compressor to stop working?

Top Reasons Your AC Compressor Stopped Working Dirty condenser coils. Blocked suction lines. Low refrigerant charge. Incorrect suction line size.

Why is my LG air conditioner not turning off?

The condenser coils dissipate the heat as the refrigerant passes through the coils. If the condenser coils are dirty, they won’t be able to dissipate the heat as effectively.

What to do if your air conditioner is not turning on?

Press RESET on the power plug. Power ON the air conditioner from the control panel. If the unit does not turn on, the air conditioner is not receiving power. The unit will require a repair service please visit our Request a Repair page. The outlet is not receiving power. Contact an electrician for further assistance.

What kind of power does a LG air conditioner need?

Unit requires a 208/230 volt. The outlet must be rated to provide the proper power level to the unit. If you only changed the outlet to match the power cord plug, but did not have the outlet rewired, then the unit will not be receiving the correct power. Unit uses a 115 volt.

How do I unplug my LG air conditioner?

Beginning of dialog window. Escape will cancel and close the window. End of dialog window. This is a modal window. This modal can be closed by pressing the Escape key or activating the close button. Unplug the unit for at least 30 seconds. Use a timer if necessary.

Categories: Trending