At what height is edge protection required?

1100mm
Building Regulations part K This edge protection needs to consist of at least two horizontal rails and have a minimum height of 1100mm.

What is the edge protection?

Edge protection is the preferred control for preventing falls from roofs on single-storey buildings because it isolates multiple workers from the risk of a fall.

Do you need edge protection?

Where there is a risk of falling more than two metres, normally roof edge protection consisting of suitable guard rails and toe boards will be required. Exceptionally, reliance may be placed on fall arrest equipment, for example safety harnesses.

What is edge protection used for?

Roof Edge Protection is designed to prevent persons falling from height to a lower level. This solution tends to consist of Guardrails and Handrails and can be applied to a variety of different locations such as rooftops, train station platforms, football stadiums, warehouses and chemical facilities.

When should edge protection be used?

Temporary edge protection is used in construction work, primarily to prevent persons and objects from falling to a lower level from working surfaces (sloped or flat). In the UK the Work at Height Regulations 2005 govern the requirements for prevention of falls and the hierarchy for solution selection.

How close can you work to an unprotected edge?

6 feet
A common rule of thumb in the construction industry is “the 6-foot rule,” i.e., that a worker on a flat surface more than 6 feet from an unprotected edge does not require fall protection. However, OSHA regulations include NO SUCH RULE.

What are the requirements for edge protection?

Home / Working at Heights / At what height do you need a fall protection system? As stated in OSH Regulations, if any personnel or contractors are at risk of falling 2 metres or more from a flat edge such as scaffolds, stairs, landings and etc, then you will need “edge protection” in place.

When must edge protection be used?

As stated in OSH Regulations, if any personnel or contractors are at risk of falling 2 metres or more from a flat edge such as scaffolds, stairs, landings and etc, then you will need “edge protection” in place.

How close to the edge of a roof can you work?

For general industry working at a 4-foot height, or a low sloped roof, OSHA requires: 6 feet from the edge: conventional fall protection (guardrail, fall restraint or fall arrest system) is required.

What are your legal responsibilities when working on roofs?

a. The person who is in control of a workplace is responsible for ensuring that the access from the ground to the work area on the roof is safe and without risk to health. Access requirements should take into account any tools and equipment the roof worker may be required to carry to and from the work site.

What does edge protector mean?

edge protector (Noun) An angle piece fitted over the edge of boxes, crates, bundles, and other packages to prevent the pressure from metal bands or other types from cutting into the package.

When is rooftop fall protection required?

Rooftop Safety: What Heights for General or Rooftop Fall Protection? To meet OSHA requirements in the construction industry, employers must provide workers with fall protection whenever they work at heights of six feet or more above a lower level (29 CFR 1926.501(b)(1)).

Is flat roof safe?

Flat Roofing Safety. Single-unit (monolithic) roofing applied to flat roofs may seem “safer” to some roof workers, but the work is still at height and subject to many similar hazards and safety requirements as sloped roof work.

Is roofing safe?

Safe Roofing. On any roofing project, the importance of taking safety precautions cannot be understated. Far too often, workers are hurt or killed because of not having in place, or not following a safety plan. According to MSN there are approximately 37 fatalities annually among roofers for every 100,000.