Is CL2 or CL3 better?

Published by Charlie Davidson on

Is CL2 or CL3 better?

The difference between the two is that CL2 is rated for up to 150 volts while CL3 is rated for up to 300 volts. (NEC 725.71 F) According to NEC 725.2, CL2 offers some protection from electric shock while CL3 offers a bit more because it is rated to carry more voltage.

What is the difference between CL2 and CL3 speaker wire?

The main difference between the two is the wattage that a CL3 rated cable can carry. While CL2 cables can carry a surge of up to 150 watts, and CL3 can carry twice that at 300 watts. A CL3 rated cable can take the place of any CL3, however, a CL2 cannot take the place of a CL3.

What is CL2 speaker wire?

CL2: This is a cable jacket fire resistance rating defined in Article 725 of the National Electric Code. It stands for “Class 2 Remote-Control, Signaling, and Power-Limited Circuits” cable, which indicates that the cable is suitable for in-wall installation and use for certain low-voltage applications.

Does speaker wire need Cl2?

General Guidelines. For anything that is destined to go in-wall, you want unterminated CL2-rated cable. That includes your surround speakers, in-ceiling or in-wall speakers and anything that might run up inside a wall cavity—even for a short run. These are most common for interior wall-mounted televisions.

Is it OK to splice speaker wire?

Splices degrade the sound: Audio experts have determined that properly spliced and soldered wires do not change or degrade the sound coming out of speakers. Although an oscilloscope can detect splices by identifying small voltage drops or spikes, the anomalies are too small to hear.

What kind of wire should I use for outdoor speakers?

Use 16-gauge wire for runs of 80 feet and less. For runs of 80 to 200 feet, step up a notch to 14-gauge wire. If you plan to go out more than 200 feet, opt for 12-gauge wire.

Can I mix 12 gauge and 14 gauge wire?

More specifically, can you connect 14-gauge wire to 12-gauge wire? While this is possible, it is not recommended in order to prevent overloading. For example, if the amp capacity of your breaker is 20 amps, you should only use 12-gauge wire, and if it’s 15 amps, the entire circuit should be 14-gauge.

Is GearIt speaker wire good?

GearIt 14 Gauge Expect reliable, undistorted sound with full conductivity. PROS: Premium craftsmanship and durability. CONS: We wish the polarity signals on the wires were more pronounced.

How are Cl2 and CL3 speaker wires different?

The only difference between them is CL3 speaker wires can take 300 volts, compared to 150 volts of CL2 speaker wires. Take this in mind when selecting your indoor/outdoor speakers. You don’t want the amplifier of a speaker to be stronger than a CL2/CL3 speaker wire or else it will blow out.

What’s the voltage limit on a Cl2 wire?

In full, CL2 means “Class 2”. Their application is meant for low-voltage stuff. Examples of low-voltage are simple fans, compressors, and conveyor belts. The voltage limit for a CL2 speaker wire is 150 volts.

What kind of Cl2 cable is used between floors?

Aside from being able to withstand 150 volts, CL2 cables are also classified as “Riser Rated” (CL2R) and “Plenum Rated” (CL2P). Riser rated cable is used between floors.

Which is an example of a low voltage speaker wire?

Examples of low-voltage are simple fans, compressors, and conveyor belts. The voltage limit for a CL2 speaker wire is 150 volts. Most homes have a voltage limit of 150, and there’s a reason for this. The government doesn’t want people in residential homes dying due to electrocution mistakes.

Categories: Helpful tips