# How much does a bushel of corn weigh at 20% moisture?

## How much does a bushel of corn weigh at 20% moisture?

56 lbs.
Grain moisture content is considered on a wet-weight basis, below are standard moisture contents for different grains. a. A bushel of corn at any moisture level weighs 56 lbs.

### How much does a bushel of corn weigh at 15% moisture?

56 pounds
While the 56 pound per bushel test weight for corn is based on a moisture content of 15.5 percent moisture, some grain purchasers will use a moisture value of 15 percent and retain the 56 pounds per bushel value for calculation.

#### What is a good moisture for corn?

around 23 to 25%
The optimum harvest moisture content for corn is around 23 to 25%. At this moisture content range, kernels generally shell from the cob easily.

What is a good bushel weight for corn?

56 lbs/bu
Iowa State University reports that corn test weight values can range from 45 lbs/bu to over 60 lbs/bu. The United States Department of Agriculture established the standard test weight of a bushel of corn as 56 lbs/bu based on 15.5% moisture content.

What is a bushel of corn worth?

A corn price of \$5.70 per bushel is used, the same as given in the May WASDE report. From 2000 to 2019, average prices received by central Illinois farmers exceeded the MYA price by \$. 04 per bushel.

## What do farmers do with dead corn stalks?

What can you do with dead corn stalks after harvest? Corn stalks can be repurposed as mulch, compost, decorations, or feed for animals. You are saving yourself from potential bug outbreaks, garden eyesores, and ensure that your soil stays nice and healthy by removing the stovers before winter.

### How is the weight of corn converted to moisture?

Shelled corn figures apply at any time. Divide total grain weight by appropriate standard bushel weight. Divide total grain weight by 100. Table 4. Moisture conversion for soybeans. Table 5. Moisture conversion for wheat. Table 6. Moisture conversion for grain sorghum.

#### What is the moisture content of corn silage?

Following approximately 16 hours drying, the average calculated dry matter content of all samples was approximately 32.5%. When the NIR was used to adjust the sample dry matter content to include the residual moisture that was left in the sample the average total dry matter content was 31.4% (Figure 2).

How do you test for residual moisture in corn?

All methods require an additional laboratory step to determine residual moisture content of a sample for complete accuracy. This can be accomplished using either a NIRS-based moisture determination or a standard high temperature (135°C) lab oven method. Sample grind and fineness of chop is important in determining sample moisture content.

What is the shrink factor for corn on the cob?

When shelled corn is dried from 25% to 15.5% total weight reduction is 11.24% of the original weight. When handling loss is added the total weight reduction would be greater than 11.24%. To estimate the total shrink or total weight loss grain buyers generally use a constant shrink factor which can range from 1.2% to 1.5%.

Categories: Popular lifehacks