What are the safety rules for a disc sander?

Published by Charlie Davidson on

What are the safety rules for a disc sander?

Safety Rules for the Disc Sander

  • Always wear proper eye and ear protection, and a dust mask.
  • Turn on the MARK 7/MARK V, let the disc get up to speed, then feed the workpiece.
  • Never reach over the disc or behind it while it’s running.
  • Always sand on the downward motion side of the disc ( Figure 17-3).

What precautions should be taken when using a disk belt sander?

What should you do to work safely with belt sanders?

  1. Wear safety glasses or goggles, or a face shield (with safety glasses or goggles).
  2. Wear a dust respirator for dusty operations.
  3. Make sure the sander is switched “OFF” before connecting the power supply.

What hazards does the disc sander present?

POTENTIAL HAZARDS AND INJURIES

  • Abrasions.
  • Eye injuries.
  • Excessive dust.
  • Unsecured material being flung around.

What breathing PPE should be worn when using an orbital sander?

Wear a Dust Mask When you sand a surface, the tool will remove small pieces of material that rise and float in the air as dust particles. Without a mask, you may accidentally inhale some of these dust particles, which can lead to health problems later down the road.

What are the biggest sanding mistakes to avoid with a sanding machine?

Avoid running the sander with RPMs or PSI settings too high or too low. Whether using an electric or pneumatic sander, having the appropriate sander speed (RPM) for your application will be key in achieving a high-quality finish, and avoiding issues like sanding swirls.

What is the main purpose of a disc sander?

Made up of a circular abrasive paper, mounted on a circular plate; the disc sander is ideal for end grain work, shaping subtle round corners and removing large amounts of material quickly. The work is supported by a flat table which sits in front of the abrasive disc.

What part of the disc sander should not be used?

AVOID kickback by sanding in accordance with directional arrows. Sand on downward side of disc. Sanding on the upward side could cause the workpiece to fly up causing injury.

Should you wear a mask while sanding wood?

Most of the dust from saws, planers, drills, and even routers is consists of much larger particles. Sanding is probably the worst culprit for producing very fine dust, so wearing a mask while sanding with power sanders is more important than most other times.

What is a sander tool used for?

Sander, portable power tool used for smoothing, polishing, or cleaning a surface, as of wood, plastic, or metal. Sanders are also used to roughen surfaces in preparation for finishing. There are three main types of power sanders: the disk sander, the belt sander, and the orbital sander.

Categories: Helpful tips