What is the torque on Chevy 1500 lug nuts?

Published by Charlie Davidson on

What is the torque on Chevy 1500 lug nuts?

140 ft-lbs
Chevrolet Wheel Lug Nut Torque Specs, Recommendations

Model Trim Torque
SILVERADO 1500 17″BASE / CREW CAB 140 ft-lbs
SILVERADO 2500 17″BASE / CREW CAB 140 ft-lbs
SILVERADO 3500 DUALLY / WT/LT/LTZ 140 ft-lbs
SONIC – ALL 15″BASE / SEDAN 100 ft-lbs

What is the torque on a wheel hub assembly?

The torque specifications for GM wheel hubs generally range between 107 to 225 foot-pounds, depending on the year and model.

Do axle nuts need to be torqued?

Forum Moderator The axle nut needs to be torqued to 180 ft lbs.

How do you torque a pro torque nut?

Using a torque wrench:

  1. Using a torque wrench:
  2. 1 (A) Tighten the nut to 200 ft-lbs.
  3. Spin the wheel at least one full rotation.
  4. (B) Tighten the nut to 200 ft-lbs.
  5. Spin the wheel at least one full rotation.
  6. (C) Tighten the nut to 200 ft-lbs.
  7. 2 Back off until loose.
  8. Using a torque wrench:

What is the torque of a pickup truck lug nut?

1/2-inch – 75-85 lb-ft.

How many ft-lbs should lug nuts be?

Most automotive lug nuts are tightened to 90 – 120 ft. lbs… Trucks will be more, about 120-150 ft. lbs.

What is the torque setting for a wheel bearing?

Generally, jam nuts less than 2-5/8″ should be torqued to 200-300 lbf-ft; nuts 2-5/8″ and over should be torqued to 250-400 lbf-ft.

What are torque specifications for Chevy axle nut?

After installation, stake nut. 2012-2017 There are two types of wheel drive shaft nuts, both of which have different tightening torque specifications. Check the style nut that is on the vehicle when staking the nut. Style 1 nut has the thin collar (1.5 mm) thickness. Style 2 nut has the thick collar (2.7 mm) thickness.

What happens when you over torque a spindle nut?

Under torque of a spindle nut will allow excessive bearing movement causing uneven loading and excessive wear. Over torque of the spindle nut will cause the bearing to overheat, one of the most common causes for bearing failure. It is important to use the correct torque when installing the spindle nut.

How much torque does a Chevy Malibu have?

2013-2017 Tighten in three steps: First, 111 ft-lbs/150 Nm; second, loosen 45 degrees; last, tighten 185 ft-lbs/250 Nm. Malibu Limited 2016 Tighten to 111 ft-lbs/150 Nm. Back off 45 degrees and retighten to 184 ft-lbs/250 Nm.

Categories: Helpful tips