What UL 1363?
What UL 1363?
SPRPT are power distribution components intended to supply power to plug-connected components of a movable equipment assemblies that are rack, table, or pedestal-mounted. SPRPT are intended for use as components of complete equipment submitted for investigation rather than for direct separate installation in the field.
What is a UL 1449 surge protector?
UL 1449 Voltage Protection Rating (VPR) is a measure of the surge protector’s “let-through” voltage, which is the maximum voltage a surge protector will let through to connected devices. UL 1449 Suppressed Voltage Rating (SVR) is an earlier measure of let-through voltage based on a test using a 500-amp current.
What is a UL 1363 power strip?
28 products. Surge-protected power strips are portable blocks of electrical sockets that supply power to multiple devices from one outlet and protect the connected devices from damage due to unexpected voltage increases.
How do I know if my surge protector is UL approved?
Be sure that the product is listed as a transient voltage surge suppressor. This means that it meets the criteria for UL 1449, UL’s minimum performance standard for surge suppressors. There are a lot of power strips listed by UL that have no surge protection components at all.
What is ul498?
Document History. UL 498. April 28, 2017. UL STANDARD FOR SAFETY Attachment Plugs and Receptacles. These requirements cover attachment plugs, receptacles, cord connectors, inlets, current taps provided with wiring terminals for flexible cord, and flatiron and appliance plugs – all intended for…
What is relocatable power tap?
Relocatable Power Taps Relocatable power taps, often called outlet strips, are Listed under the Relocatable Power Taps category (XBYS), and are intended for indoor use as relocatable, multiple outlet extensions of a single branch circuit; they supply power to a wide range of portable electric equipment and appliances.
Are all surge protectors UL 1449?
All UL® Listed Surge Protection Devices (SPD’s), commonly known as surge suppressors, must comply with the new Underwriters Laboratories Standard UL 1449 3rd Edition. Formerly, all UL Listed surge suppressors complied with UL 1449 2nd Edition.
What is the purpose of UL?
In a nutshell, UL is a safety organization that sets industry-wide standards on new products. They continually check these products to ensure they’re up to these standards. UL testing makes sure that wire sizes are correct or devices can handle the amount of current they claim to be able to.
Is Tessan UL approved?
-> UL APPROVAL Cord with Flat Plug; -> Wall Mountable and Safety; -> 18 Month Warranty, 30-DAY refund guarantee and Lifetime technical supported; Buy 10 for $25.19 each and save 10%
What is a UL plug?
When something is UL-Listed, that means that the UL has tested the device, and it meets their requirements for safety (fire or shock hazard). Because of this it is highly recommended that all of your electrical products carry the UL seal so that you can ensure the customers safety and satisfaction with your products.
What is the UL 1449 surge protection standard?
The newly issued UL 1449 Standard for Surge Protective Devices for safety and is the preferred standard for all AC surge protection devices (SPDs). Requirements that cover surge protective devices (SPDs) designed for the repeated limiting of transient voltage surges as specified in the standard on 50 or 60 Hz power circuits not exceeding 1000 V.
Which is the latest version of ul 1363?
UL 1363 – UL Standard for Safety Relocatable Power Taps | Engineering360 Find the most up-to-date version of UL 1363 at Engineering360. UNLIMITEDFREEACCESSTO THEWORLD’SBEST IDEAS
What is the UL standard for power strips?
In 2010, UL adopted UL 1363A, a new standard for “Special Purpose Relocatable Power Taps,” power strips permanently attached to medical equipment assemblies. As a result, power strips used in patient care areas must be tested to UL standard UL 1363A or UL 60601-1.
What are the requirements of the UL Standard?
1.3 A product intended for connection to an ac circuit or supply source other than that specified in 2 may be examined and tested in accordance with the intent of the requirements in this standard and, if found to be substantially equivalent, may be judged to comply with this Standard.