Why is my Sony receiver not working?

Try different cables to verify this is not a bad set of cables. Try setting the Audio/Video (A/V) receiver to a different Surround Sound mode. Check each speaker to make sure they are properly connected to the A/V receiver. Perform a Test Tone function to verify if the speakers are working correctly.

Why is my receiver not working?

* Your receiver may have speaker fuses or circuit breakers on its back panel next to the speaker connections. If all of your stereo components stop working, find the receiver’s circuit breaker or fuse, usually on the back panel, and: * Reset the breaker or replace the fuse with one of the same rating.

Why is my Sony stereo not turning on?

Securely plug your device to a working wall outlet. Remove any surge protector. If it still won’t turn on, try a different wall outlet. Make sure that your device is set to the correct voltage for your area.

Why does my Sony stereo keep saying protect?

If you’re wondering why “my Sony receiver is flashing protect,” it’s likely related to a short circuit or a power surge. Once the protect mode is activated, the speakers will not function until the threat is removed. The best first course of action is to simply turn everything off and wait while the system cools down.

How do I get my stereo out of Protect Mode?

Turn off the receiver and let it cool for a few hours; then try again. If the protection mode warning doesn’t go away on its own, press the reset button. If that doesn’t work, disconnect the power lead from your receiver for 30 seconds and then reconnect it. If it still doesn’t work, it’s time to take it to the dealer.

How do I fix my stereo speakers not working?

How to Fix a Stereo Receiver That’s Not Making Sound

• Check the power. Ensure that all plugs are firmly seated in their respective sockets because sometimes a plug can slip out halfway and not draw power.
• Check the speaker/source selection.
• Check the speaker wires.
• Check the speakers.
• Check the source components.

How do you know if your receiver is blown?

You should not hear any static at normal volume levels unless there is something wrong with your system or the recording you are listening to. If you hear static in a lot of recordings, and you don’t crank your music/movies, then there is probably something wrong with your system.

Why does my Sony receiver have no power?

Have you had a power outage or have there been thunderstorms recently? If so there may have been a power surge that has affected your receiver.

How can I Hear my Sony TV through my Receiver?

Find programming instructions and codes for your Sony remote control. Find replacement remote controls, parts and accessories. How do I hear TV sound through the A/V Receiver or Home Theater System speakers?

How can I troubleshoot my Sony Bravia TV?

Does your TV have an issue? Most issues can be resolved by following easy troubleshooting steps. To get started, select the issue or symptom with your TV. If your questions aren’t covered in this guide, please enter your query in the search bar on the main Sony support website.

How to troubleshoot if there is no sound or…?

Test each one of the HDMI inputs on the A/V receiver to confirm that all of the inputs for the A/V receiver are working. Try a couple of different HDMI cables to verify there is not a bad set of cables.