What size is the pinion nut on GM 10 Bolt?

Published by Charlie Davidson on

What size is the pinion nut on GM 10 Bolt?

GM 7.5″, 8.5″, OR 8.6″ CHEVY 10 BOLT REAREND PINION NUT *NEW* | eBay.

What size is the pinion nut on GM 12 Bolt?

Yukon Gear & Axle (YSPPN-016) Pinion Nut For GM 12 Bolt Car & Truck, 55-62 Car & Truck, 8.2″, 8.2″ Buick/Olds/Pontiac & 63-79 Corvette. 1 1/8″ Socket, 7/8″ X 16 Thread.

What size is the pinion nut on a 14 bolt?

10.5″
10.5″ GM 14 bolt truck pinion nut.

What size is the pinion nut on a Dana 35?

Replacement pinion nut for Model 20 & 35, Dana 30 JK, 44 JK front, Ford 10.25″, 10.5″ & some 9.75″. 7/8-20 thread, 1 1/8 socket.

What is the torque specs on pinion nut?

TORQUE SPECS: Pinion Nut 110-125 ft/lbs unless higher torque required per step #6 above.

What size is the pinion nut on a Dana 44?

1 5/16″
Technical Notes: 1 5/16″ socket, 7/8″-14 thread.

What size is the axle nut on a Dana 30?

Re: Dana 30 axle nut 36mm hub nut and the 13mm 12pt sockets worked perfectly for me today!

What is the torque on a Dana 44 pinion nut?

Premium Member. Page 47 describes setting the pinion nut torque to 200-220 ft lbs and the torque-to-rotate should be 20-40 in lbs.

What size is the pinion nut on a Dana 60?

QU40022 Dana 60, Dana 70 Pinion Nut Genuine Dana-Spicer all-metal, prevailing torque type lock nut is the original equipment replacement part for most Dana-Spicer Model 60, 61, 70, and 70HD front and rear axles. Use 1-5/16″ socket.

What size is a Jeep axle nut?

35mm is the nut size, they say 36mm will work. X2 35mm is a tight fit sometimes, but a gently tap seats the socket. A 36 mm fits a little loose, but if it’s a six sided socket it is perfectly fine.

What size is the axle nut on a Jeep Cherokee?

36 millimeter
On the Cherokees, that’s a 36 millimeter nut, but you’ll notice that it spins, so I’ve got the screwdriver I like to use just an old, beat up, big screwdriver. Stick it in your breaks like that. It’ll keep it from spinning.

Categories: Blog